How to Add a Date Stamp to Digicam Photos: A Brand-by-Brand Guide

Nikon Coolpix S2800 dijital kamera, tarih damgası nasıl eklenir rehberi kapağı

Quick answer: You can add a date stamp to digicam photos in two ways: in-camera, from the menu as you shoot (“Date Stamp” on Canon, “Print date” on Nikon, “Write Date” on Sony, “DATE STAMP” on Fujifilm, “Imprint” on Samsung, “Timestamp” on Casio), or afterwards with software or a print service that reads the capture date stored in the photo’s EXIF data. An in-camera stamp is permanent and cannot be removed, so set the date and time correctly first. If your camera has no such setting, adding it afterwards is the only option.

Last updated: November 16, 2026 · RetroCameraLand team

Nikon Coolpix S2800 compact digital camera, a model with a Print date stamp option in its setup menu
Nikon Coolpix S2800: according to its manual, the date stamp is switched on with “Print date” in the setup menu.

What Is a Date Stamp and How Does It Work on a Digital Camera?

Film compacts printed the date onto the film with light. A digital camera has two different “dates”:

  • The invisible date (EXIF): digital cameras write the local date and time set on the device into every photo’s metadata (Wikipedia – Exif). It is always there, but you cannot see it on the picture.
  • The visible stamp: when you turn it on in the menu, the date is burned into the image pixels, usually in the bottom-right corner. Samsung and Casio manuals state explicitly that the stamp goes in the lower-right corner (Samsung, Casio).

So even if your camera has no date-stamp menu, the photo’s date is not lost – you can generate the stamp from the EXIF data later. We covered why that orange corner date is loved in our guide to the Y2K look; this page is only about how to add it.

Which Brands and Models Have an In-Camera Date Stamp?

The table shows, for each brand, the menu name and restrictions we verified in a manufacturer manual or support page (or a published copy of the manual). One important point: the feature depends on the model, not the brand. A setting found on one model may be missing, or named differently, on another model from the same maker.

BrandMenu nameOptionsNotesSource
CanonDate StampDate / Date & TimeRec. menu; not settable in Movie mode; font, colour and position cannot be changedManual
NikonPrint date (yeni modellerde Date stamp)Date / Date and time / OffSetup menu; cannot be added after capture or to moviesManual
SonyWrite DateOn / OffStamps the date only (not the time); not in movie, panorama, burst or Easy ModeManual
FujifilmDATE STAMPTarih+saat / Tarih / OFFSetup menu; not applied to movies or panoramasManual
OlympusDate StampOff / OnShooting menu 2; unavailable if the clock is not set; not in panorama or sequential shootingManual
PanasonicDate StampW/O TIME / WITH TIME / OFFRec menu; not with burst, Auto Bracket, movies or panoramaManual
SamsungImprintOff / Date / Date&TimeSetup tab; printed bottom right, still images onlyManual
CasioTimestampDate / Date&Time / OffSet Up tab; lower right corner; digital zoom disabled while stampingManual

Menu names come from the example models checked in each source (Canon PowerShot support page, Nikon COOLPIX S2800/W150, Sony DSC-W800, Fujifilm XP140, Olympus VG-160, Panasonic DMC-LZ30, Samsung Digimax i5, Casio EX-Z1200). Not every model from a brand has the feature – check the manual for your exact model.

Rules that apply almost everywhere

  • The stamp is permanent. The Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic and Casio sources all state that a stamped date cannot be removed afterwards.
  • Video is not stamped. According to the Canon, Nikon, Sony, Fujifilm, Panasonic and Samsung sources, the stamp applies to still photos only.
  • Some modes switch it off. Panorama, burst and certain scene modes usually do not work with the stamp.
  • The clock must be set. The Olympus manual says Date Stamp cannot be selected if the clock is not set, and the Fujifilm manual says the camera will first prompt you to set the clock (Olympus, Fujifilm).

Step by Step: How to Turn On the Date Stamp

Menu layouts differ by model, but the flow is the same on almost every camera:

  1. Set the date and time. In the setup menu, find “Date/Time”, “Time zone and date” or “Clock Set”. You can usually choose the date format (day/month/year) there too.
  2. Find the stamp setting. On Canon it is “Date Stamp” in the shooting (Rec.) menu (Canon); on Nikon, “Print date” in the setup menu (Nikon); on Sony, MENU → Settings → Shooting Settings → “Write Date” (Sony).
  3. Choose the option. Date only, or date and time? Some models, like the Sony W800, stamp the date only (Sony).
  4. Check the screen. On Canon a “DATE” icon should appear; if it does not, press DISP. to change the display (Canon).
  5. Take a test shot and check the corner date in playback. If it is wrong, fix the setting and carry on – the stamp on that frame can no longer be changed.

Tip: for a Y2K look you can deliberately set the camera clock to an old date (say, 2005). Just remember the EXIF capture date will use that wrong date too, so your photos will sort into the wrong year in your phone’s gallery. The date range a camera accepts varies by model.

A model whose manual we checked for the date-stamp setting, plus accessories that help:

Why Does the Date and Time Keep Resetting? The Clock Battery

If an old camera asks for the date every time you switch it on, the culprit is usually the internal clock battery. This small backup cell keeps the clock running when the main battery is out and recharges while the main battery is in:

  • Canon: according to Canon support, the built-in date/time battery keeps the settings for about three weeks after the main battery is removed, and recharges in about 4 hours once a charged battery is inserted, even with the camera off. When it runs out, the Date/Time screen appears at start-up (Canon).
  • Nikon: the COOLPIX S2800 manual says the clock runs on a built-in backup battery that charges when the main battery is inserted or an AC adapter is connected, and about ten hours of charging runs the clock for several days (Nikon).

The practical fix: insert a fully charged battery, leave it in for at least a few hours (overnight is ideal for Nikon), then set the date again. If the date still resets constantly, the backup cell may be worn out. That will not stop you taking photos, but the date stamp and EXIF date will need setting each time. For other common issues, see our guide to retro camera faults and fixes.

How to Add a Date Stamp After Shooting

If your camera has no stamp menu, or you would rather shoot clean and decide later, you can add the stamp afterwards using the capture date in the EXIF data. There are three routes:

1. The manufacturer’s desktop software

Canon explains how to add the shooting date in ImageBrowser EX via Edit → Insert Text → Import Shooting Date/Time, saving the result as a separate file (Canon). Nikon’s S2800 manual likewise says ViewNX 2 can print the shooting date on images captured without “Print date” (Nikon). The advantage: the original file stays untouched.

2. At print time (DPOF)

Casio’s manual notes that even if you do not use Timestamp, you can add the date later with the DPOF function or a printing application (Casio). Careful: if you also request a date at print time for photos already stamped in-camera, the date can print twice – which is why the Fujifilm and Panasonic manuals advise turning print-date off for stamped photos (Fujifilm, Panasonic).

3. Phone and desktop apps

Once the photos are on your phone, you can use apps that read the EXIF date and add a corner stamp. When choosing one, check whether it uses the capture date (EXIF) or the day the file was copied to the phone – the latter stamps the same date on everything. Also remember the EXIF date is whatever the camera clock said; if the clock was wrong, the stamp will be too (Wikipedia – Exif).

First you need the photos on your phone – the video and our camera-to-phone transfer guide show how:

In-Camera or Afterwards? Pros and Cons

In-camera stampStamp added later
LookThe camera’s own font and colour – the genuine 2000s lookDepends on the app; can look imitated
Reversible?No, permanentYes, the original file is kept
Font/colour/positionCannot be changed (Canon says so explicitly)Fully adjustable
EffortSwitch on once and forgetAn extra step per photo or batch
VideoNot stampedCan be added in a video editor
Wrong-clock riskA wrong date becomes permanentIf EXIF is wrong, so is the stamp

Our recommendation: turn the in-camera stamp on for special days (birthdays, holidays, graduations), shoot the rest clean, and add a stamp later if you need one. It keeps your archive clean and your Y2K shots authentic.

Tips for a Convincing Y2K Date Stamp

  • Shoot at a large image size: because the stamp is burned into the pixels, it can become hard to read at small image sizes.
  • Compose around the bottom-right corner: the stamp usually lands there, so keep important details out of that corner.
  • Combine it with flash: the full Y2K package is a flash portrait plus a corner date. See our night flash guide for flash settings.
  • Ask before you buy: if the date stamp matters to you, check that the model’s manual lists the setting. Unsure? Use the camera finder quiz or browse the Retro Digital Cameras collection.

Frequently Asked Questions

How do I turn on the date stamp on a digital camera?

First set the date and time in the setup menu. Then find the stamp setting, such as Date Stamp on Canon, Print date on Nikon, Write Date on Sony, DATE STAMP on Fujifilm, Imprint on Samsung or Timestamp on Casio, and choose Date or Date and Time.

Can a date stamp be removed later?

No. A stamp added in-camera becomes part of the image pixels, and the manufacturer sources we checked state it cannot be removed afterwards. If you want a removable stamp, shoot without it and add the date later.

What if my camera has no date stamp option?

The capture date is still stored in the EXIF data. You can add a stamp later with manufacturer software such as Canon ImageBrowser EX or Nikon ViewNX 2, with DPOF print-date at a printer, or with a phone app that reads the EXIF date.

Why does my old digital camera ask for the date every time?

The internal clock battery has probably run down. It recharges while the main battery is in; Canon says it charges in about 4 hours and then keeps the settings for about three weeks without the main battery. Insert a charged battery, wait a few hours, then set the date again.

Is the date stamp added to videos too?

No. According to the Canon, Nikon, Sony, Fujifilm, Panasonic and Samsung sources we checked, the date stamp applies to still photos only and is not added to movie recordings. To put a date on a video, use a video editing app.

Sources

  1. Canon Asia – How do I add the date and time to my pictures? (Date Stamp)
  2. Canon Asia – Adding a Date Stamp to Images after Shooting (ImageBrowser EX)
  3. Canon Hong Kong – Setting the Date and Time (PowerShot SX230 HS / SX220 HS)
  4. Nikon – COOLPIX S2800 User's Manual (Print date, clock battery, ViewNX 2)
  5. Nikon Online Manual – COOLPIX W150 Date stamp
  6. Sony Help Guide – DSC-W800 Write Date
  7. Fujifilm – FinePix XP140 Owner's Manual, SET-UP 2 (Date Stamp)
  8. Olympus – VG-160 Instruction Manual (Date Stamp)
  9. Panasonic DMC-LZ30 Owner's Manual – Date Stamp (manualsdir.com copy)
  10. Samsung Digimax i5 User Manual – Imprinting the recording date (manualsdir.com copy)
  11. Casio EXILIM EX-Z1200 User's Guide – Date stamping snapshots (manualsdir.com copy)
  12. Wikipedia – Exif (date and time metadata)

Want to see our date-stamped Y2K shots? Follow along for test shots and short how-to videos.

YouTube · Instagram · TikTok · Pinterest

0 comments

Leave a comment